How to test a screen for dead pixels
To test for dead pixels, fill the whole screen with one solid color at a time and look closely for dots that do not match. This dead pixel test cycles through black, white, red, green, blue and gray in full screen. A dead pixel shows as a dark dot on bright colors; a stuck pixel stays lit in one color.
Each LCD pixel is made of three subpixels, red, green and blue. A dead pixel has all three off and shows black on a white screen. A stuck pixel has one or more subpixels always on, so it shows a fixed color on black. A hot pixel stays white. Screen makers judge warranty claims by how many of each type appear, often following ISO 13406-2 pixel fault classes.
Clean the screen first so dust is not mistaken for a pixel fault, and check it from a normal viewing distance as well as close up.
Can a stuck pixel be fixed?
Sometimes. A stuck pixel is a pixel, or one of its red, green or blue subpixels, that stays on (defective pixel), and rapidly flashing colors over it for 10 to 20 minutes can free it. A dead pixel that stays black on every color is usually a hardware fault that software cannot repair.
When to check for dead pixels
Run the test when a new monitor, laptop or phone arrives, while it can still be returned, and before buying a used screen. Photographers checking a new editing monitor can also judge it with compare images on a known reference photo. To check a display’s sharpness, the PPI calculator gives its pixel density.
Is the dead pixel flasher safe?
The flasher only changes colors on screen, so it cannot harm the display. It does flash rapidly, so anyone sensitive to flashing lights or with photosensitive epilepsy should not watch it. Start it, look away, and check back after 10 to 20 minutes.